Chemical composition | Aqueous dispersion of polyvinyl acetate, modified starch, auxiliary additives |
---|---|
Form / colour | White paste forming a transparent film after drying |
Smell | mild, specific |
pH | 7-8 |
Density | approx. 1.0 g/cm3 |
Application method | painting roller, brush |
Substrate type | plaster (gypsum; cement), gypsum plasterboard |
Spreading rate | about 4 m2 /kg depending on type of wallpaper and substrate |
Thinner | water |
Joint colour | colourless |
Shelf life | 24 months from production date. After opening it is recommended to use the adhesive within 2 weeks |
Storage conditions | The adhesive is resistant to short-term freezing down to -10ºC Recommended storage temperature 5-35ºC, in a tightly closed original package. |
Professional adhesive for heavy wallpapers, ready to use.
Application
Glue on the basis of polyvinyl acetate dispersion for heavy wallpapers weighing over 380 g/m2. For indoor use.
Properties
Vinylpex guarantees a permanent and very strong bond of wallpaper to the wall that powder adhesives cannot guarantee. The bond is transparent when dry. The special formulation of the adhesive enables convenient application and strong bonding to the wall. Ecological product, does not contain solvents.
Substrate preparation
The substrate should be dry, clean, dust-free, smooth and strong. In case of crumbling substrates, unstable parts of the substrate should be removed and cavities filled with mud. Strongly absorbent substrates should be primed with priming emulsion.
Application
Mix the adhesive thoroughly before use. Apply the product directly on the wall with a painting roller or a brush. Pay attention to evenly spread the adhesive on the wall. Before application, read additional information from the wallpaper manufacturer. Excess
adhesive is removed immediately with a damp cloth.
Safety of application
Product non-flammable. Not classified as hazardous. During and after the work, ventilate the room until the smell disappears. Keep the product out of the reach of children.
Legal information
All information and data contained herein are given in good faith and in accordance with the knowledge possessed by our laboratories. However, they must be taken as indications without guarantee if the product is beyond our control. The technical information is not a certification of product quality or an offer. The manufacturer is not liable for misuse of the information contained in this data sheet or for the consequences thereof. In case of doubt always carry out a test. The manufacturer reserves the right to change the above data without notifying the customer.